Looking for Custom Epoxy Garage Flooring in Middle TN? Schedule a Free Consultation
Hot tires lifted your DIY coating? We remove it, fix the cause and install a floor that stays put.
Peeling is almost always a prep or moisture problem. Hardware-store kits and under-prepped coatings lift when hot tires, moisture or poor bonding win. Simply recoating over a failing film only repeats the failure.
We strip the old coating, grind the slab to clean concrete, test moisture and repair damage, then install a system that is built for garage life. It is the proper fix, not a patch.
We test for moisture and examine the old failure pattern.
Failed coating is ground or scraped off completely.
Diamond grinding creates a profile the new coating can grip.
A professional system chosen for your slab and use.
Tell us what you see and get a plain-English prep plan.
Four calm, clear steps from first conversation to finished floor.
We inspect, test moisture and see what failed.
Machines strip and grind it away.
Cracks and pits are fixed and the slab is primed where needed.
The new system is applied and cured.
We install five systems. These are good starting points for a peeling floor repair project.
Flexible base + UV-stable topcoatPolyurea + Polyaspartic HybridOur top-tier system: a flexible polyurea base for grip and movement, finished with a clear polyaspartic topcoat for…Cure speedUV stabilityHot tiresSee system details 
UV-stable fast-cure aliphaticPolyasparticFast-curing, UV-stable and tough: the modern favorite for garages that need to be back in service quickly.Cure speedUV stabilityHot tiresSee system details 
Two-part resin systemEpoxyThe classic, high-build garage floor coating: superb adhesion, deep gloss and the widest range of decorative finishes.Cure speedUV stabilityHot tiresSee system details 
Coating RemovalFailed epoxy, thick paint and old sealers come off cleanly so the new floor can bond.Explore 
Moisture TestingMoisture vapor is the hidden reason coatings fail. We test the slab and specify the right primer before…Explore 
Grinding & PrepDiamond grinding is what separates a floor that lasts from one that peels. It is where our work…Explore 
Recoating & RefreshA dull, scuffed or fading coating does not have to be replaced. Often a fresh topcoat brings back…Explore No. New coating will fail the same way. The old film must come off.
The most common reasons are thin prep, moisture vapor and low-quality kits. We find out which before we recoat.
It costs more than a recoat because removal is real work, but it is the way to fix it for good.
Tap your community to see how we coat floors there.
Free assessment, honest advice and clear pricing.
